Farady Distribution transformer has rugged design for durability

Farady distribution transformer has rugged design for durability. It has primary voltage rating of 240/480 Volts and secondary voltage rating of 120/240 Volts at 60 Hz. The 10kva single phase transformer rated at 50 kVA. Isolation transformer windings are made of aluminum. Reverse connectable transformer has temperature rating of 150 deg C. Indoor/Outdoor enclosure transformer has floor/wall-mounting for inspecting connection. Air/dry cooling transformer offers lugs/bolt-down terminal connection.

Farady 100kva power transformers

Farady 100kva power transformers are required for many different furnace processes and applications. It can be designed to withstand repeated short-circuit conditions and high thermal stresses. Distribution transformers operate under very severe conditions with regard to frequent overcurrents and overvoltages generated by short-circuits in the furnace and the operation of the high voltage circuit breaker. The continuous at high utilization. loading is cyclic, while in other applications the loading is more continuous at high utilization.

Farady pole mount transformer Overload Capacity

Utilities are now able to operate china electrical transformer beyond full rated load to at least 109% to more precisely size transformers based on the period of peak demand—without reducing insulation life. Moisture and thermal stress are the enemy of transformer reliability and life. Our Farady 50 kva pole mount transformer have longer life contributes to system reliability performance. The capacity to load transformers continuously at higher temperature and varying loads without causing damage to the transformer contributes to better overall system reliability.

Farady produce power and distribution transformers

Farady 50kva power transformer are key elements of energetic systems which need safety and working durability. Devices produced in Power Engineering S.A. meet these requirements. We guarantee your satisfaction of using our products. On request, we are able to produce power and distribution transformers. Our Engineering Department develops new transformers adjusting their parameters to the requirements of our Customers. Before commissioning the production of documentation, we also make the necessary calculations and tests using the latest computational techniques and in cooperation, so that products meet all customer requirements, quality standards and ensure long trouble-free operation.

Highly efficient Farady distribution transformer

The conventional distribution transformer makes use of highly efficient and energy saving wound core, and our product is mounted on the pole, thereby cutting down the installation size, construction cost and low-voltage power supply radius. As a result, the low voltage line loss is reduced by as much as 60% or more, and the power supply quality is enhanced. Moreover, this device is featured by excellent overload capability, convenient maintenance, continuous and reliable working, etc. Our conventional pole mounted distribution transformer is commonly used in various places including rural areas, remote regions and scattered villages to provide high quality power supply for daily lighting, agricultural production and industrial plants. Aside from these, it is also suitable for the energy saving projects for railway and urban grid.

The Advantage of Farady pole transformer

The conventional pole transformer is equipped with self-sealing pressure relief valve, while the upper and lower hanger brackets which are manufactured by hot rolled steel and are welded to the tank, are in accordance with ANSI standard. The ground connector is ring-type and bolted.In general, every single phase pole mounted transformers of our products adopts self-sealing cylindrical structure, and employs lifting lug, grounding device, pressure relief valve and other components. In addition, there is one or two high voltage bushings on the cover, and the low voltage bushings are mounted on the wall, and eyebolt terminals are applied for the bushings.

Farady high voltage single-phase pole mounted distribution transformer

For the conventional single-phase pole mounted distribution transformer, the high voltage porcelain bushing installed on the top of the cover band is outfitted with eyebolt terminal, and the undercut gasket seats offer better sealing result. The terminal, made from cast bronze and plated with tin, fits for connection to copper or aluminum cable. The Single Phase Transformer one-piece fasten ring achieves different functions, such as extending the service life of our product, facilitating inspection process, maintaining uniform pressure around the entire rim, etc. Meanwhile, it works together with a specially made tank rim, drawn cover and gasket to realize reliable sealing performance.

Farady produce pole mounted distribution transformers

Farady produce pole mounted distribution transformers from 10 to 500kVA. Using design principles based on over 10 years of transformer design experience combined with modern process technologies and design modelling, Farady pole mounted transformer continue to be leaders in their class. Farady pole mounted distribution transformers are manufactured to standard designs, primarily for power utilities or approved service providers. All standard designs have been proven by type testing or evaluation of similar designs, including impulse, short circuit, temperature rise, and sound level.