Farady pole mounted transformer for you

Farady pole mounted transformer Meets ANSI/IEEE/CSA standard;polemounted transformer tank coating exceeds ANSI C57.12.31;pole mounted transformer cover with a minimum dielectric strength of 8 kV;pole mounted transformers tin-plated high-and low-voltage bushing terminals to accommodate aluminum or copper conductors;pole mounted transformers with laser-scribed anodized aluminum nameplate;pole mounted transformers electrical grade mineral oil;single phase pole mounted transformer (50 kva pole mount transformer)with heavy-duty lifting lugs and hanger brackets per ANSI/CSA requirements;pole mounted transformers Visible cover ground on units with cover-mounted bushings;pole mounted transformers recessed tank bottom that offers protection when sliding over rough surfaces;pole mounted transformers with automatic pressure relief device;pole mounted transformers use Polymer low-voltage bushings (5-50 kVA);pole mounted transformers build with arrester mounting and grounding provisions;pole mounted transformers secondary leads are stamped to ensure proper identification;Stainless steel loops on cover band;Dependable Overhead pole mounted transformers

A high quality 50 kva pole mount transformer

A high quality 50 kva pole mount transformer.

1.The polemounted transformer are low loss, and significantly energy-saving.

2. The core laminations are made up from high-quality cold-rolled grain-oriented silicon steel sheets

3. Zigzag directed flow of oil are provided within the windings

4. The regulating winding is a separate winding which apart from the high voltage main winding

5. The windings of one phase are assembled into an integral phase block before placing into the core.

6. Core frames in the form of a flat plate are used for clamping the core.

7.Transformer tanks are fabricated with steel plates wide enough so that there are no weld joints on each surface.

8.Diaphragm membrane is provided within the conservator, preventing direct contact of oil with air, protecting the oil from aging

9.Reliably sealed, and fine machined for sealed surface.

10. Quality assurance rules are also observed for all insulating parts,and main components.

Features to 50 kva pole mount transformer

1. Complete sealing construction and equipped with self-sealing pressure release device in 50 kva pole mount transformer.

2. Cover mounted high-voltage bushing with longer creepage distance and equipped with arcing horns per BS standard.

3. One piece fasten ring prolongs the life of the transformer, facilitates inspection and maintains even pressure around the entire rim. 

4. EXternally-operable, tap changer switches for safe operation.

5. supplied with Oil temperature / Oil level gauge.

6. High permeability and low coecivity- higher efficiency in polemounted transformer.

7. Low loss-Lower no load loss and temperature rise.

8. Low excitation current – lower Full load loss. 

9. Excellent temperature stability.