a high reliability power transformer

The series of 50kva power transformer with three steps of the third step seam, in the core of the shear surface of the brushing paint, helps the core solidified into one, thereby reducing noise, the winding all use continuous winding, and The use of new scientific research results, so that the winding is relatively stable, increasing the mechanical strength of the winding, the series of oil immersed power transformer with high reliability, advanced level of performance, economic indicators are reasonable, high reliability power transformers replacement products.

Farady pole mounted transformer for you

Farady pole mounted transformer Meets ANSI/IEEE/CSA standard;polemounted transformer tank coating exceeds ANSI C57.12.31;pole mounted transformer cover with a minimum dielectric strength of 8 kV;pole mounted transformers tin-plated high-and low-voltage bushing terminals to accommodate aluminum or copper conductors;pole mounted transformers with laser-scribed anodized aluminum nameplate;pole mounted transformers electrical grade mineral oil;single phase pole mounted transformer (50 kva pole mount transformer)with heavy-duty lifting lugs and hanger brackets per ANSI/CSA requirements;pole mounted transformers Visible cover ground on units with cover-mounted bushings;pole mounted transformers recessed tank bottom that offers protection when sliding over rough surfaces;pole mounted transformers with automatic pressure relief device;pole mounted transformers use Polymer low-voltage bushings (5-50 kVA);pole mounted transformers build with arrester mounting and grounding provisions;pole mounted transformers secondary leads are stamped to ensure proper identification;Stainless steel loops on cover band;Dependable Overhead pole mounted transformers

50kva power transformer - providing the current and temperature dual protection

The 50kva power transformer uses the oil-immersed load switch, it has the load opening & closing operation, provides the serial connection of backup-protection fused and plug – in fuse –range protection , it is very simple in principle, economical and reliable . its backup-protection fuse is the high-current limiting fuse, with the large breaking capacity, and plug-in fuse has the built-in double-sensitivity fuse, providing the current and temperature dual protection.

single phase pole mounted transformers

single phase pole mounted transformers are usually used in rural areas where three phase power may not be required.  These Transformers reduce the voltage from the line voltage 11kV to a single phase voltage usually 230V.The secondary of the Pole mounted Distribution is usually connected between the two phases of a MV line.  The secondary voltage is a single phase voltage which is fed to the house.  These transformers (includ 50 kva pole mount transformer)can be easily installed and do not require extensive mounting Structures.Pole mounted Transformers come in sizes up to 500 kVA.These transformers have a fuse to protect against faults inside the transformer.  They are also equipped with an interrupting device.  These Transformers are tested to withstand the impulse of lightning. In the US, The secondary of these transformers has a centre tapping and therefore has three terminals.The voltage between the end terminal and the centre tapping will provide 120V while the voltage between two end terminals will be 220 volts. These Single Phase Pole Mounted transformers can also be used to provide three phase LV supply.

About power transformer for you

A power transformer (50kva power transformer)is a passive electromagnetic device that transfers energy from one circuit to another circuit by means of inductive coupling. Power transformers differ from other transformer types in that they are designed to comply with regulatory requirements for mains power interfacing, working at mains voltages and relatively high currents. The most important specification of a power transformer is its primary to secondary transformer galvanic isolation, which is usually specified in kV. This is a fundamental safety aspect in protecting humans from potentially lethal earth fault conditions.Dry power transformers typically have a single primary (mains side) winding and one or more secondary windings. The secondary winding may be tapped at different points to generate multiple voltage outputs. A power transformer operates according to Faradays Law of Induction. A transformer’s secondary voltage is equal to the negative rate of change of the magnetic flux enclosing the circuit. The magnetic flux enclosing the secondary circuit is caused by the AC flowing in the primary winding. This AC generates a changing flux that couples through a common core into the secondary winding. Voltage ratio is equivalent to the winding turn ratio. Transformers are extremely efficient when operating within their design specifications. Core type is an important consideration. Typical power transformer supplies include: laminated core, semi-toroidal and toroidal. Laminations can be important as they help prevent eddy currents flowing in the core that cause loss of efficiency. Maximum output current is specified at the point where the core is saturated or the windings current rating is exceeded. There are many mounting options including: chassis mount, DIN rail, wall mount and PCB mount. Terminations can be solder lugs, wire leads and terminal blocks. Galvanic isolation is typically rated between 1.5kV and 5kV. Power transformers are found in any application that requires mains power. They are also used as 1:1 isolating transformers for equipment safety. 120-240V transformers are also available for conversion between mains standards. 

Pole mounted transformer with a sealed tank construction designed

Farady pole mounted transformer features sealed tank construction and are designed and built one at a time for your specific application. As a result,Farady can manufacture custom units with an endless array of voltages, frequencies, and configuration variations. Our pole mounts (includ 50 kva pole mount transformer)are available in single phase and three phase, as well as auto-transformer configurations.

A Wide Assortment of Power Transformers

We are a most trusted name among the topmost companies in this business, involved in manufacturing a wide assortment of power transformers to our customers. These Power Transformers (50kva power transformer) are convenient to install and have excellent shear strength.Banking on the skills of our qualified team of professionals, we are involved in providing electrical power transformers to our customers. These Electrical Power Transformers are used to transfer electric energy between two or more circuits through electromagnetic induction.